Quectel Adds Ten 5G Combo Antennas from 2-in-1 to 9-in-1: Nine-in-One Model Carries EN50155 and EN45545 Rail Approval
Quectel has added ten external combo antennas that combine 5G with GNSS, Wi-Fi or both in a single housing, from a 50 mm low-profile part to a 167 mm nine-in-one, rated IP65 to IP69K. The nine-in-one YEMT901J1AH carries eight 5G elements plus dual-band GNSS and meets EN50155 and EN45545 rail standards, while the CPE model YEMJ4F0JBAM offers isolation of -17 dB or better and up to 85.8% efficiency.
Quectel released ten external combo antennas in Munich on 11 November 2026, each combining 5G with GNSS, Wi-Fi or all three in one housing. A device no longer needs a separate antenna specified, mounted and tested for every radio path; the integrator picks one unit by size, technology mix and environment. Housings run from a 50 mm puck to a 167 mm nine-in-one, with IP65 to IP69K protection.
Ten models grouped by installation, not by band
The split follows device format, not frequency. Four low-profile parts serve vehicles, fleets and smart-city equipment: YEMN203L1AM pairs 5G with GNSS in a 50 mm housing; YEMN303J1BM adds Wi-Fi including the 6 GHz band for a three-in-one at the same footprint; YEMA210L1AM takes adhesive or screw mounting; YEMN208L1AM stands 15.5 mm tall. HD video backhaul, fleet management, vehicle tracking and warehouse logistics are the intended loads.
Five parts cover transport, mining and industry, all IP69K, in taller housings bolted where vibration and washdown meet. Fixed CPE and gateways get one model: a 210 mm by 14 mm disc that trades low profile for high-band efficiency.
What the family shares sits at the element level. Multiple omnidirectional elements are separated for isolation against self-interference, most models cover 600–6000 MHz with backward compatibility down to 2G, LTE Cat-M and NB-IoT, and all mount with screws. Quectel antenna lead David Wei casts the change as matching the antenna to the device rather than the reverse. Sourcing antennas and modules from one supplier also trims the bill of materials.
The comparison shifts to isolation and efficiency
Three data sheets carry the argument. YEMJ4F0JBAM puts four independent elements on 1695–2700 MHz and 3300–6000 MHz with isolation of -17 dB or better, efficiency up to 85.8 percent and peak gain up to 5.2 dBi; for a CPE, throughput ceilings follow from these figures, not nominal band width. YEMN517U1AM is a five-in-one whose four 5G paths measure 31.8, 33.7, 20.4 and 29.9 percent, with GNSS LNA gain of 28 dB plus or minus 3 dB. YEMT901J1AH carries eight 5G elements plus one GNSS element, the most 5G paths in the family: four LMH on 600–960 MHz and 1400–6000 MHz, four MH on 1400–6000 MHz.
- Isolation: elements sharing a shell couple and lift the receive noise floor, hence the -17 dB ceiling.
- Efficiency: volume and neighbouring elements consume it; the four paths above spread from 20.4 to 33.7 percent.
- Noise: GNSS depends on LNA gain, quoted at 28 dB plus or minus 3 dB.
- Mechanics: IP65 and IP69K mark two mounting positions; IK09 decides impact survival.
Mechanical ratings become the gate
IP65 and IP69K are not grades of water resistance but different places to mount an antenna. IP69K means high-pressure, high-temperature washdown, and with IK09 on top it removes a large share of transport and mining housings at the specification stage. YEMT901J1AH also carries EN50155 and EN45545 for rail, UV resistance to UL 746C f1, flame retardance to UL 94 V-0, an optional ECE-R118 cable, an operating range of -40 to +85 degrees Celsius, and pairing with the RM520x module series.
Dimensions constrain next. A 167 mm nine-in-one takes roof area; the 210 mm disc needs a flat panel and cable room; the 15.5 mm part returns clearance to racks and bodywork. Once the antenna fixes the envelope, cut-outs, harness routing and assembly sequence follow, and redesign costs more than a module swap.
Demand: more connections, higher prices
IoT Analytics, in its September 2026 tracker update, puts first-half 2026 cellular IoT module shipments up 15 percent year on year, with the second quarter up 20.9 percent year on year and 15 percent sequentially. LTE Cat 1bis grew roughly 34 percent and supplied 56 percent of the increment, heading for about 43 percent of shipments by 2030. The same tracker shows blended module prices up 2.5 percent, ending four quarters of decline, as memory costs rose and lead times nearly doubled.
Volume is expanding where data rates are low, so antenna demand grows in units rather than in price per unit; rising prices and lead times push integrators toward fewer SKUs and fewer test steps.
Why combo antennas used to cost more
A Mouser white paper explains the old constraint: combining antennas cuts operating cost and shortens time to market compared with discrete parts, but a single project often deployed only tens of thousands of units, too few to amortise tooling. Costs fell once vendors spread that development across a wider customer base and reused common form factors. Ten models on a handful of housing diameters is that logic made visible.
The financial base supports it. Quectel's unaudited third-quarter 2026 report shows nine-month revenue of 23.799 billion yuan, up 33.13 percent, net profit of 1.212 billion yuan, up 65.21 percent, and gross margin of 20.72 percent, up 3.01 points. The company frames its business as a "1+N" matrix with modules and antennas as one line, and October 2026 broker research notes the antenna unit building antenna-plus-router combinations and extending toward millimetre-wave radar.
HSY Perspective
Competition in combo antennas has moved from band coverage to isolation and mechanical rating. Once a family spans 600 to 6000 MHz, the frequency table stops separating products; isolation between elements, radiating efficiency and whether the housing survives washdown, vibration and rail certification do the separating instead. The -17 dB and 85.8 percent figures, the EN50155 and EN45545 listings, all answer one question: with several radios compressed into one shell, whose link budget still holds.
The evidence sits in two places. IoT Analytics reported in September 2026 that first-half module shipments rose 15 percent with Cat 1bis contributing 56 percent of the increment, so the connected base grows fastest where rates are low and antenna demand follows volume rather than price. The same period brought a 2.5 percent rise in average selling prices and lead times near double, which pushes integrators toward removing SKUs. The Mouser observation that deployments of tens of thousands of units could not amortise development explains why reusable form factors had to arrive before combination made economic sense, and why this launch came as a ten-model family rather than one custom design.
The judgement has boundaries. A custom device built in the low thousands cannot absorb tooling, and discrete antennas with an in-house layout may cost less; a single-band device gains nothing from combination; a chassis with generous interior space already gets its best isolation from physical distance. Where a device must pass IP69K and rail standards while bodywork fixes the envelope, selection narrows to a few models in one family, and competition moves from the data sheet to supply consistency and part-number stability.
Source: Quectel press release, 11 November 2026, Munich; industry data from IoT Analytics (September 2026 update) and the Mouser combo antenna white paper
