Quectel's EG216Q-GL and BG950Q-GL Reuse EG2 and BG95 Footprints for Drop-In Cat 1bis and Cat M1/NB2 Upgrades

恒森科技
QuectelLTE Cat 1bisLPWA modulesform factordrop-in replacement
Quectel has launched the EG216Q-GL (LTE Cat 1bis) and BG950Q-GL (Cat M1/NB2) modules in its existing EG2 and BG95 footprints, letting customers upgrade on current PCB designs without a re-spin. The EG216Q-GL reaches 10 Mbps down and 5 Mbps up on a single main antenna and drops into EC2x, EC200A, EG25/EG21 and UC200A-GL designs; the BG950Q-GL is pin-to-pin with BG95, EG91/EG95 and BC35-G in a 23.6 × 19.9 × 2.2 mm LGA.

On 10 November 2026 at Electronica in Munich, Quectel launched the EG216Q-GL and BG950Q-GL, two global cellular IoT modules built on Qualcomm technology. Neither brings a new footprint: one keeps the EG2 outline, the other the BG95, so existing PCB layouts and development work carry over to a cheaper, lower-power generation.

Form factor before specification

The usual sequence is new baseband, new package, then a customer who re-spins the board and reruns certification. Quectel reversed it. The EG216Q-GL targets designs already on the EG2 form factor; the BG950Q-GL targets the BG95 family and the NB-IoT and Cat M1 platforms before it. The argument sits in the compatibility list, not the peak data rate.

Delbert Sun, Quectel's Deputy General Manager of the Product Department, framed it commercially: customers have invested heavily in these two outlines, and the new modules carry that investment onto a lower-cost, lower-power platform — answering component inflation by upgrading rather than redesigning.

EG216Q-GL: a long same-footprint replacement list

The EG216Q-GL is an LTE Cat 1bis module in a 29.0 × 32.0 × 2.4 mm, 4.9 g LGA. It is 3GPP Rel-14, rated from -40 °C to +85 °C, and supports DFOTA updates.

  • Radio: one primary antenna delivers up to 10 Mbps downlink and 5 Mbps uplink, with no second antenna or feed line for diversity.
  • Positioning: built-in Wi-Fi scanning for location awareness without full GNSS reliance; primary, Wi-Fi scan and optional GNSS antennas.
  • Drivers: USB serial for Windows 10/11, Linux and Android.
  • Drop-in: the EC2x family (EC25, EC21, EC20-CE), EC200A, EG25-G and EG25-GL, EG21-G and EG21-GL, and the UC200A-GL.

Targets are commercial telematics, payment terminals, asset tracking, remote monitoring and control, smart security and automation, and metering and grid equipment — the segments that drove Cat 1bis growth, and the reason inheritance matters at this installed-base scale.

BG950Q-GL: pin-to-pin, built for years on a battery

The BG950Q-GL is an ultra-low-power LTE Cat M1 and NB2 module in a 23.6 × 19.9 × 2.2 mm LGA, an SMT package built for automated high-volume production. It is Rel-14, rated from -40 °C to +85 °C, and reaches 300 kbps downlink and 1100 kbps uplink on Cat M1.

Compatibility is pin-to-pin: BG95, BG95xA, BG950S LPWA, EG91 and EG95 LTE, and the BC35-G and BC95 R2.0 NB-IoT modules common in meters and municipal projects. The target is devices running for years on a battery — smart meters, asset and personal trackers, safety wearables and wireless POS, where the replacement cycle outlasts the module roadmap.

Cat 1bis is now the highest-volume cellular IoT technology

IoT Analytics' September 2026 update to its Global Cellular IoT Module and Chipset Market Tracker & Forecast puts first-half 2026 module shipments up 15% year on year: 8.9% in the first quarter, 20.9% in the second quarter, which itself rose 15% sequentially against 3.7% a year earlier.

The mix moved more than the total. LTE Cat 1bis grew roughly 34% in the half and supplied 56% of incremental volume; in the second quarter it rose 45.3% sequentially, about 76% of sequential growth. It is now the highest-volume cellular IoT technology and should hold about 43% of shipments by 2030, pulled by tracking, POS terminals, network cameras and metering. NB-IoT has fallen from its first-quarter 2024 peak; RedCap and eRedCap should reach roughly 15% by 2030.

The longer arc: 4.7 billion cellular IoT connections in 2025, up 13.3%, with that year's shipments split NB-IoT 33.5%, Cat 1bis 21.4% and 4G 18.6%. Cat 1bis overtook NB-IoT within twelve months — the backdrop for replacing older EG2 designs.

Cost, lead times and the quarterly numbers

The same tracker carries procurement data. The blended module ASP rose 2.5% year on year in the first half, ending four quarters of decline, on memory and component costs; high-end products with external DDR3 were hit hardest, one vendor reporting a DDR3 part at roughly seven times its first-quarter level. Lead times for several categories have nearly doubled.

Quectel's unaudited third-quarter report of 20 October shows the pressure and the scale: nine-month revenue of RMB 23.799 billion, up 33.13%, net profit of RMB 1.212 billion, up 65.21%; third-quarter revenue of RMB 8.539 billion, up 34.89%, net profit of RMB 609 million, up 132.34%, gross margin 24.3%, up 6.6 points. Operating cash flow was negative RMB 1.863 billion on inventory building. October brokerage research puts its global Cat 1bis shipments in the hundreds of millions, and Quectel first worldwide in second-quarter 2026 module and chipset shipments with a share approaching 41%.

Quectel also supplies reference designs, evaluation tools, technical support and an antenna portfolio to shorten design-in.

HSY Perspective

What this round of module upgrades actually trades in is part-number continuity. The EG2 and BG95 outlines each anchor a body of designs already in mass production; the EG216Q-GL list runs from the EC2x family to the UC200A-GL, and the BG950Q-GL is pin-to-pin with BG95, EG91, EG95 and BC35-G. What a customer swaps is the module — not the PCB, the enclosure, the antenna positions, or the carrier acceptance and end-product certification already in hand.

Set against this cost environment, continuity acquires a price. IoT Analytics' September 2026 tracker shows the blended module ASP up 2.5%, ending four quarters of decline, a high-end DDR3 part at roughly seven times its first-quarter level, and lead times close to double. Quectel's 24.3% quarterly gross margin beside negative RMB 1.863 billion of operating cash flow is the same pressure arriving in a P&L. A board change means RF and EMC retesting, new tooling and a fresh certification cycle, and those steps become unmanageable once they queue behind doubled lead times. What is saved is not a component's cost but a stretch of time that cannot be scheduled.

The boundaries are clear. The judgment holds where the design is frozen, the module sits in a certification-constrained position, and the downstream product has no urgent need for throughput. If the platform has not reached volume, or the customer is already redesigning — moving to RedCap, needing higher uplink — the premium for a compatible footprint narrows quickly and performance reclaims priority. IoT Analytics expects RedCap and eRedCap together to take about 15% of shipments by 2030, and that volume belongs to new designs, not to part-number swaps.

Sources: Quectel press release, Munich, 10 November 2026; Quectel product pages for the EG216Q-GL and BG950Q-GL; IoT Analytics, Global Cellular IoT Module and Chipset Market Tracker & Forecast, September 2026 update, and its 16 September 2026 article; IoT Business News, 17 September 2026; IoT Analytics, Cellular IoT market update 2026, 29 April 2026; Quectel 2026 third-quarter report, 20 October 2026.